How To Repair Tongue Jacks
Crank tongue jack repair and an electric tongue jack upgrade
Full-fourth dimension RV living is filled with take chances, but there are a few adventures that you lot really don't expect. Our travel trailer is over a decade former, so it's not surprising that the original creepo tongue jack would eventually cause some trouble.
Nosotros had no problems the first iii months on the route, merely the natural language jack got harder to creepo after we had hitched and unhitched the trailer a few dozen times. I did a bit of inquiry and learned how to lubricate the jack, but of grade, life got in the way and the maintenance work for the tongue jack never happened.
As y'all can probably guess, my procrastination eventually led to disaster—a broken roll-pin which secured the crank to the gears on the within of the tongue jack. The result was a free-spinning crank. Since I had already done the inquiry on how to lubricate the tongue jack, I pulled upwards the videos I had already watched to see what the roll-pin looked like when information technology wasn't broken and and so did a Google Maps search to see if there was a home depot or car parts store nearby. Luckily, there was a Napa Auto Parts store but a mile away. Since our truck was half hitched upwards to the trailer when the pin bankrupt, I had to ride to the store on my bike. Luckily Napa had a coil-pivot that was merely the right size, resulting in our cheapest RV repair to appointment—a mere 28 cents.
Fixing the travel trailer tongue jack was pretty simple. All I had to do was remove the protective cap at the top, re-insert the crank into the gears and spike everything dorsum into place by hammering in the new roll-pin. Once everything was put back together, we were able to get the trailer completely hitched up to the truck and head to our side by side campground with the intention of fully removing the jack to lubricate it in one case nosotros arrived.
Merely rather than putting in the time and attempt into lubricating the crank jack, I decided to care for myself to an upgrade. I removed the erstwhile tongue jack and swapped it out with a new Ulta Fab Ultra 3502 Electric Tongue Jack. I tin can't tell you how happy I am with the decision to upgrade. Using the former crank jack wasn't difficult, but it did get annoying when trying to level the trailer. With the new electric jack, I can now hitch or unhitch the trailer without breaking a sweat. The Ulta Fab Ultra 3502 Electrical Tongue Jack isn't the well-nigh expensive or check electric natural language jack out in that location, but the eight-inches of travel and 3,500 lbs. of lifting power were more than acceptable for our trailer.
If y'all have any questions about the install procedure, check out the video or just leave a annotate below.
Source: https://thegrayadventure.com/crank-tongue-jack-repair-and-an-electric-tongue-jack-upgrade/
Posted by: mathiswhiseved.blogspot.com
0 Response to "How To Repair Tongue Jacks"
Post a Comment